How to add WIFI IP camera into WIFI NVR Quick Guide HIKVISION TECHNICAL SUPPORT TEAM 2018-6-5
1 How to add IP camera with custom protocol How to add WIFI IP camera into WIFI NVR For WIFI kit, we just need to power on the NVR and IPC respectively, and NVR will automatically add IP camera through wireless. The following methods mainly introduce how to add non - packaged IP camera into WIFI NVR, and before adding, we should ensure that IP camera’s password is the same as NVR’s password. (1) Connect IP camera, NVR and computer to a switch with network cable.
2 How to add IP camera with custom protocol (2) Up to now, IP camera has successfully connected the wireless of NVR. You can see the device that has connected to the NVR wireless successfully in the local GUI of NVR, under Maintenance---System Info---WIFI. (3) If IP camera connects to the wireless of NVR successfully, NVR will automatically add IP camera with wired IP firstly. If the IP camera’s password is the same as NVR’s password, this step will be finished automatically.
3 How to add IP camera with custom protocol (4) Pull out the network cable of the camera. When wired IP network is unreachable, NVR will add IP camera with wireless IP address instead of wired IP. At this time, there will be signs of signal strength in the live view interface. Up to now, the non - packaged IP camera is added into WIFI NVR successfully. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
4 How to add IP camera with custom protocol First Choice for Security Professionals Hikvision Technical Support © Hikvision Digital Technology Co., Ltd. All Rights Reserved.