Quick Start Guide

Rev. 010918NA
1 I N S T A L L A T I O N ( c o n t i n u e d )
2.
Connect one end of the data cable to the DVR motherboard and th
e other end to the HDD.
Figure 1-3 Connect Data Cable
3.
Connect the power cable to the HDD.
Figure 1-4 Connect Power Cable
4.
Place the HDD on the bottom of the
device, then fasten the screws on the
bottom to affix the HDD.
5. Re-install the DVR cover and fasten
screws.
Figure 1-5 Affix Hard Disk