Quick Start Guide

Rev. 010918NA
2 M E N U O P E R A T I O N ( c o n t i n u e d )
 User Logout, Shutdown, and Reboot
You can log out of the system, shut down, or reboot the device upon demand.
1.
Go to
Menu > Shutdown
.
2. Click Logout, Shutdown, or Reboot.
After logging out of the system,
menu operation on the screen is
invalid. A user name and
password must be entered to
unlock the system.
Figure 1-10 Logout
 Viewing Signal Input Status
The analog signal inputs (TurboHD, AHD, HD-CVI, CVBS) and IP signal input can be recognized and
connected automatically. For some DVR series, you can configure 5 MP long distance transmission on the
Signal Input Status interface. For other models, there is no Signal Input Status interface.
The following steps are for configuring 5 MP long distance transmission for DVRs that support
this feature.
1.
Go to Menu > Camera > Signal Input
Status.
2. Click to enter the 5 MP Long Distance
Transmission Settings interface.
Figure 1-11 Signal Input Status
3.
Check the
channel(s)
to enable 5 MP
l
ong
distance transmission.
4. Click Apply to save the settings and OK
to return to the Signal Input Status
interface.
Figure 1-12 5 MP Long Distance Transmission Settings