Quick Start Guide

Rev. 010918NA
2 M E N U O P E R A T I O N ( c o n t i n u e d )
STRONG PASSWORD RECOMMENDED – We highly recommend that you create a strong password of
your own choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to increase
the security of your product. We also recommend that you reset your password regularly. Especially in
high security systems, resetting the password monthly or weekly can better protect your product.
 Using the Unlock Pattern for Login
For the Admin user, you can configure an unlock pattern for device login after the device has been activated.
1.
Use the mouse to draw a pattern among
the nine dots on the screen. Release the
mouse when the pattern is done.
Connect at least four dots to draw
the pattern.
Each dot can be connected only
once.
2. Draw the same pattern again to confirm
it. When the two patterns match, the
pattern is configured successfully.
3. Use the unlock pattern for future logins.
Figure 1-8 Draw the Pattern
 User Login
If the DVR has logged out, you must log in to the device again before operating the menu and other functions.
1.
Select the user n
ame in the drop
-
down
list.
2. Enter the Password.
3. Click OK to log in.
If you enter the wrong admin
password seven times, the
account will lock for 60 seconds.
If you enter the wrong operator
password five times, the account
will lock for 60 seconds.
Figure 1-9 Login