Operation Manual

User Manual of DS-7200/7300/8100-SH Series DVR
45
2. Select the mode from the drop-down menu according to different light conditions.
Four modes are selectable:
 Standard: in general lighting conditions (default).
 Indoor: the image is relatively smoother.
 Dim Light: the image is smoother than the other three modes.
 Outdoor: the image is relatively clearer and sharper. The degree of contrast and saturation is high.
Figure 3. 5 Image Settings
3. Adjust the image parameters including the brightness, contrast, saturation, hue, sharpness level and
denoising level by moving the sliding bar or increasing/decreasing the value.
The adjustable value range is 0~255 for the brightness, contrast, saturation and hue, 0~15 for the
sharpness level and 0~5 for the denoising level.
4. Copy image parameters.
1) If you want to copy the image parameters of the current camera to other analog camera (s), click
the Copy button to enter the Copy to interface:
Figure 3. 6 Copy Image Settings to Other Camera (s)
2) Select the analog camera (s) to be configured with the image settings. You can also click the
checkbox of Analog to select all cameras.