User Manual

Network Video Recorder User Manual
68
The configured privacy mask zones on the window can be cleared by clicking the corresponding
Clear Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
Click Apply to save the settings.
Configure the Video Parameters
Purpose:
You can customize the image parameters including the brightness, contrast, saturation for the live
view and recording effect.
Click on the main menu bar.
Click Display.
Select the camera from the drop-down list.
Adjust the slider or click on the up/down arrow to set the value of the brightness,
contrast or saturation.
Click Apply to save the settings.
Configure the Day/Night Switch
Purpose:
The camera can be set to day, night or auto switch mode according to the surrounding
illumination conditions.
Click on the main menu bar.
Click Display.
Select the camera from the drop-down list.
Select Day/Night Switch to Day, Night, Auto or Auto-Switch.
Auto: The camera switches between the day mode and the night mode according to the
illumination automatically.
The sensitivity ranges from 0 to 7, and the higher sensitivity results in the more easily to
trigger the mode switch.
The switch time refers to the interval time between the day/night switch. You can set it from
5 sec to 120 sec.
Auto-Switch: The camera switches the day mode and the night mode according to the start
time and end time you set.