User Manual

Network Video Recorder User Manual
8
Local Monitoring
 For DS-7300/8100/9000HUHI-K, DS-7324/7332/8124/8132HQHI-K, DS-7300/8100/9000HTHI-
K, iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series, there are two HDMI interfaces of
which the HDMI 1 and VGA interfaces share simultaneous output. For HDMI1/VGA output, up
to 1920 × 1080 resolution is supported. For HDMI 2 output, up to 4K (3840 × 2160) resolution
is supported;
 1/4/6/8/9/16/25/36/64 screen live view is supported, and the display sequence of screens is
adjustable;
 Live view screen can be switched in group and manual switch and automatic cycle live view are
also provided, the interval of automatic cycle can be adjusted;
 CVBS output only serves as the aux output or live view output.
 Quick setting menu is provided for live view;
 The selected live view channel can be shielded;
 Except for iDS-7200HQHI-K/S and iDS-7200HUHI-K/S series, for HUHI, HTHI, iDS-7316HUHI-
K4/16S and iDS-9016HUHI-K8/16S series DVR, VCA information overlay in live view for the
supported analog cameras and in smart playback for the supported analog and IP cameras;
 Motion detection, video-tampering detection, video exception alarm, video loss alarm and
VCA alarm functions;
 For DS-7300/8100/9000HUHI-K and DS-7300/8100/9000HTHI-K series DVR, 1-ch analog
camera supports people counting and heat map functions;
 iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series DVR supports false alarm filtering and
picture re-recognition for up to 16-ch behavior (line crossing and intrusion) detection;
 iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series DVR supports false alarm filtering and
picture re-recognition for human body or vehicle target detection;
 iDS-7200HQHI-K/S and iDS-7200HUHI-K/S series support deep learning-based analysis: re-
recognition of the human body or vehicle target in behavior detection to filter false alarm,
supports 2-ch detection for iDS-7204HQHI-K1/2S, 4-ch for iDS-7208HQHI-K1/4S, 4-ch for iDS-
7200HQHI-K2/4S, 4-ch for iDS-7200HUHI-K1/4S, 4-ch for iDS-7200HUHI-K2/4S series;
 -K/P series DVR can detect the PoC module exception. When it cannot detect the PoC module
or the PoC module is powered off abnormally, alarms are triggered, and linkage methods are
configurable;
 HGHI series support only 1-ch line crossing detection and intrusion detection. HTHI series DVR
support full-channel line crossing detection and intrusion detection, and 2-ch sudden scene
change detection. For HUHI series DVR(except iDS-7200HUHI-K/S series), if enhanced VCA
mode is enabled, full-channel line crossing detection and intrusion detection, and 2-ch sudden
scene change detection are supported, but 2K/4K output and 4 MP/5 MP/8 MP signal input
are not supported; if enhanced VCA mode is disabled, 2-ch line crossing detection and
intrusion detection, and 2-ch sudden scene change detection are supported, and 2K/4K output
and 4 MP/5 MP/8 MP signal input are also supported. DS-7200HQHI series support up to 4-ch
line crossing detection and intrusion detection if enhanced VCA mode is enabled. And DS-
7216/7224/7232HQHI series DVR also support 1-ch sudden scene change detection. DS-