User Manual

DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA 117
Figure 151, Detailed Event
3. Set the alarm linkage actions. For details, see Chapter 8.7 Setting Alarm Response Actions.
4. Click Apply to save the settings.
8.7 Setting Alarm Response Actions
Alarm response actions will be activated when an alarm or exception occurs, including Full Screen Monitoring,
Audible Warning (buzzer), Notify Surveillance Center, Send E-mail, and Trigger Alarm Output.
• Full Screen Monitoring
When an alarm is triggered, the local monitor (HDMI, VGA, or CVBS monitor) displays in full screen the
video image from the alarming channel configured for full screen monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images will be switched every
10 seconds (default dwell time). A different dwell time can be set in Menu > Configuration > Live View.
Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.
• Audible Warning
Trigger an audible beep when an alarm is detected.
• Notify Surveillance Center
Sends an exception or alarm signal to the remote alarm host when an event occurs. The alarm host refers
to a PC installed with the Remote Client.
The alarm signal will be transmitted automatically at detection mode
when the remote alarm host is configured.