User Manual

DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA 131
Sensitivity in Rule Settings ranges from 1 to 100. The higher the
value, the more easily the change of scene will trigger the alarm.
For analog cameras, line crossing detection and intrusion detection
conflict with other VCA detections such as sudden scene change
detection, face detection, and vehicle detection. Only one function
can be enabled. If you enable line crossing detection or intrusion
detection, if you enable sudden scene change detection and apply
the settings, the following attention box pops up to remind you there
is not enough resources and asks you to disable the enabled VCA
type(s) of the selected channel(s).
Figure 163, Disable Other VCA Type(s)
9.15 PIR Alarm
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's field of view. The heat energy
dissipated by a person, or other warm blooded creatures such as dogs, cats, etc., can be detected.
1. Enter the VCA settings interface, Menu > Camera > VCA.
2. Select the camera for which to configure the VCA.
3. Check the Save VCA Picture checkbox to save the captured VCA detection pictures.
4. Set the VCA detection type to PIR Alarm.
5. Click to configure the trigger channel, arming schedule, linkage action, and PTZ linking for the PIR alarm.
6. Click Rule Settings to set the rules.
7. Click Apply to activate the settings.
Chapter 10 VCA Search
With the configured VCA detection, the device supports various VCA search functions: behavior search, face search,
plate search, people counting, and heat map results of the IP cameras.