User Manual

DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
146 UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA
11.2.6 Configuring More Settings
1. Enter the Network Settings interface. Menu > Configuration > Network.
2. Select the More Settings tab to enter the More Settings interface.
Figure 183, More Settings Interface
3. Configure the remote alarm host, server port, HTTP port, multicast, and RTSP port.
• Alarm Host IP/Port: With a remote alarm host configured, the device will send the alarm event
or exception message to the host when an alarm is triggered. The remote alarm host must
have the CMS (Client Management System) software installed.
The Alarm Host IP refers to the IP address of the remote PC on which the CMS (Client
Management System) software (e.g., iVMS-4200) is installed, and the Alarm Host Port must be
the same as the alarm monitoring port configured in the software (default port is 7200).
• Multicast IP: The multicast can be configured to realize live view for more than the maximum
number of cameras through network. A multicast address spans the Class-D IP range of
224.0.0.0 to 239.255.255.255. It is recommended to use the IP address ranging from
239.252.0.0 to 239.255.255.255.
When adding a device to the CMS (Client Management System) software, the multicast
address must be the same as the device’s multicast IP.
• RTSP Port: RTSP (Real Time Streaming Protocol) is a network control protocol designed for
use in entertainment and communications systems to control streaming media servers.
Enter the RTSP port in the RTSP Port text field. The default RTSP port is 554, and you can
change it according to different requirements.