User Manual

DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA 187
3. Configure the following settings:
• Device Name: Edit the DVR name.
• Device No.: Edit the DVR serial number. The Device No. can be set in the range of 1 to 255
(default No. is 255).
• Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes ,
the system will exit from the current operation menu to the live view screen after 5 minutes of menu
inactivity.
• CVBS Output Brightness: Adjust the video output brightness via the CVBS interface.
• Menu Output Mode: You can choose the menu display on different video output.
• Auto and HDMI/VGA are selectable.
• Enhanced VCA Mode: DS-72xxHUI-Kx Series DVRs support Enhanced VCA Mode, which allows
line crossing detection and intrusion detection on all channels. Enhanced VCA Mode conflicts with
2K/4K output and 4 MP/5 MP signal input. Enable or disable VCA mode as needed.
DS-72xxHQI-Kx Series DVRs don’t support Enhanced VCR
Mode.
The pop-up will only show mode(2),
˗ Enable Enhanced VCA Mode
1) Check the checkbox to enable enhanced VCA mode.
2) Click Apply and the attention box pops up as below.
Figure 246, Enable Enhanced VCA Mode (1)
3) Click Yes to apply the function and reboot the device.
Line crossing detection and intrusion detection will function on all
channels.
If you have configured 2K/4K output, or connected 4 MP/5 MP
signal input, when you enable Enhanced VCA Mode and the
device reboots, the output resolution will decrease to 1080p and
the 4 MP/5 MP signal input will display no video.