User Manual

DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
190 UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA
STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your own
choosing (using a minimum of eight characters, including at least three of the following categories: upper case
letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. We
also recommend you reset your password regularly. Resetting the password monthly or weekly can better protect
your product.
• Level: Set the user level to Operator or Guest. Different user levels have different
operating permissions.
• Operator: The Operator user level has permission for Two-way Audio in Remote
Configuration and all operating permissions in Camera Configuration by default.
• Guest: The Guest user has no permission for Two-way Audio in Remote Configuration and
has only the local/remote playback in the Camera Configuration by default.
• IP Address: If this is enabled and configured only computers with this IP address can
access the DVR. This can be a single computer or multiple computers if they share the
same public facing IP address.
• User’s MAC Address: This is the MAC address of the remote PC that logs onto the DVR.
If it is configured and enabled, it allows only the remote user with this MAC address to
access the DVR.
4. Click OK to save the settings and go back to the User Management interface. The added new
user will be displayed on the list, as shown in 0.
Figure 250, Added User Listed in User Management Interface
5. Assign permissions for the added user.
1) Select the user from the list and then click to enter the Permission Settings interface,
as shown in 0.