User Manual

DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA 59
Chapter 5 Recording Settings
5.1 Configuring Encoding Parameters
5.1.1 Before Starting
1. Make sure that the HDD has already been installed. If not, install and initialize an HDD (Menu >
System Configuration > HDD).
Figure 68, HDD – General
2. Click Advanced tab to check the storage mode of the HDD (Menu > System Configuration >
HDD > Storage Mode).
1) If the HDD mode is Quota, set the maximum record capacity.
2) If the HDD mode is Group, set the HDD group.
Figure 69, HDD – Advanced
5.1.2 Configure Record Parameters
1. Enter the Record Parameters interface to configure the encoding parameters, Menu > Recording
Configuration.