Operation Manual

Hikvision EURO, Inc. – DS-7208&7216HVI-S Series Embedded Net DVR User Manual

• 7PQRS/REC: The 7PQRS/REC button works as numeric [7] and letter [PQRS]. It is also used to

enter the Manual Record interface.

• 8TUV/PTZ: The 8TUV/PTZ button works as numeric [8] and letter [TUV]. It is also used to enter

the PTZ Control mode.

• 9WXYZ/PREVIEW: The 9WXYZ/PREVIEW button works as numeric [9] and letter [WXYZ]. It

is also used to switch between single screen and multi-screen mode.

• 0/A: The 0/A button works as numeric [0]. It is also used to switch between input methods (upper

and lowercase alphabet, symbols and numeric input). It can also be used to clear entire masked

areas, such as in the Motion Detection and Privacy Mask menus.

• SHIFT: The SHIFT button is used for switch button action between numeric button and control

button.

4. DIRECTION/ENTER Buttons:

• DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and

items in menus. In Playback mode, the Up and Down button is used to speed up and slow down

recorded video. The Left and Right button will select the next and previous day of recordings. In

Preview mode, these buttons can be used to cycle through channels.

• ENTER Button: The ENTER button is used to confirm selection in any of the menu modes. It can

also be used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. In

Single Play mode, pressing the ENTER button will advance the video by a single frame.

5. IR Receiver: Receiver for IR remote.

Note: It is important to note that you must click the EDIT button on either the remote or front panel on a text field

before you’re able to edit its content. After you’re done entering text, you must hit the ENTER button to be able to

move on to the next field.

Using the IR Remote Control

Your DVR may also be controlled with the included IR remote control, shown in Figure 4.

Batteries (2x AAA) must be installed before operating.