User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 156
2) Download the certificate request and submit it to the trusted
certificate authority for signature.
3) After receiving the signed valid certificate, import the certificate to
the device.
5. There will be the certificate information after you successfully create and
install the certificate.
Figure 207, Installed Certificate Property
6. Check the checkbox to enable the HTTPS function.
7. Click Save to save the settings.
11.2.8 Configuring E-Mail
Purpose
The system can be configured to send an e-mail notification to all designated
users if an event is detected, e.g. an alarm or motion event is detected, etc.
Before configuring the e-mail settings, the DVR must be connected to a local
area network (LAN) that maintains an SMTP mail server. The network must
also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification.
Additionally, the Preferred DNS server must be configured.
Before You Start
Make sure you have configured the IPv4 Address, IPv4 Subnet Mask, IPv4
Gateway, and the Preferred DNS Server in the Network Settings menu.
1. Go to Menu > System Configuration > Network > Email.
2. Select the Email tab to enter the Email Settings interface.