User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 185
14.8 Checking HDD Status
Purpose
You can check the status of the installed HDDs on the DVR so as to take immediate check
and maintenance in case of HDD failure.
1. Go to Menu > System Configuration > HDD.
2. Check the status of each HDD that is displayed on th
e list, as shown below.
Figure 260, View HDD Status (1)
If the status of HDD is Normal or Sleeping, it works normally. If the status is
Uninitialized or Abnormal, initialize the HDD before use. If the HDD initialization has
failed, replace it with a new one.
Checking HDD Status in System Information Interface
3. Go to Menu > Maintenance > System Info > HDD.
4. View the status of each HDD displayed on the list, as shown below.
Figure 261, View HDD Status (2)