User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 76
2. Select a Camera.
3. Configure the detection rules for VCA events.
4. Click Set to configure the alarm linkage actions for the VCA events.
5. Select Trigger Channel tab and select one or more channels that will start to record
when a VCA alarm is triggered.
6. Click A
pply to save the settings.
Figure 91, Set Triggered Camera of VCA Alarm
7. Enter Record Schedule Settings interface (Menu > Record > Schedule > Record
Schedule) and set Event as the record type.
5.6 Configuring Manual Recording and Continous Capture
Purpose
Follow these steps to set parameters for manual recording and continuous capture. Using
manual recording and continuous capture, you need to manually cancel the record and
capture. The manual recording and manual continuous capture is prior to the scheduled
recording and capture.
1. Go to Menu > Manual > Record.
Figure 92, Manual Record
2. Enable manual record.