Operation Manual

User Manual of DS-9600/8600/7700/7600 Series NVR
39
rtsp://192.168.1.55:554/ch1/main/av_stream.
 Protocol Name: Edit the name for the custom protocol.
 Enable Substream: If the network camera does not support sub-stream or the sub-stream is not needed,
leave the checkbox empty.
 Type: The network camera adopting custom protocol must support getting stream through standard RTSP.
 Transfer Protocol: Select the transfer protocol for the custom protocol.
 Port: Set the port No. for the custom protocol.
 Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
3. Click the Apply button to save the settings and click OK to finishing customizing the protocol.
After adding the customized protocols, you can see the protocol name is listed in the dropdown list, please refer to
Figure 2. 17.
Figure 2. 17 Protocol Setting
4. Select the custom protocol and enter the IP address, user name and password of the camera.
5. Click the Add button to add the network camera.
Figure 2. 18 Adding an IP Camera through Customized Protocol