Quick Start Guide

DS-76xxNI-QxxP NVR Quick Start Guide
QSG DS-76xxNI-QxxP 062618NA 16
Figure 19, Add IP Camera
• Select the detected IP camera and click the Add button to add it directly. You can click the Search
button to refresh the online IP camera manually, or you can choose to custom add the IP camera by
editing the parameters in the corresponding text field and then click the Add button to add it.
3.9 Live View
Icons are provided on screen in Live View mode to indicate camera status. These icons include:
Live View Icons
In the live view mode, there are icons at the upper-right corner of the screen for each channel,
showing the status of the record and alarm in the channel for quick reference.
Alarm (video loss, tampering, motion detection, VCA or sensor alarm)
Record (manual record, continuous record, motion detection, VCA or alarm triggered record)
Alarm and Record
Event/Exception (event and exception information, appears at the lower-left corner of the screen.)
3.10 Recording Settings
Before you start:
Make sure that the disk has already been installed. If not, install a disk and initialize it. Refer to the
user manual for detailed information.
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day
Record. For other record types, refer to the user manual for detailed information.