How to preview ezviz device via Web Browser / Mobile Client / Client Software ivms-4200
Contents Attention ......................................................................................................................................... 3 Make your device ready .................................................................................................................. 3 Preview via web browser ................................................................................................................ 5 Preview via mobile client ................................................
Attention The document will let you know the steps for how to register an ezviz account and how to preview the real time video of ezviz device. For more details, please refer to www.ezviz7.com/help/index.html. Make your device ready 1. 2. 3. Please connect the device (IPC/NVR/DVR) to the subnet where your computer locates. Configure the network (IP/Subnet Mask/Gateway/DNS server) correctly for your device. The ezviz access is enabled by default, but is recommended to check for your first time use.
. How to get and configure the Verification Code. a) For IP camera The verification code is marked on the device label. Use ABCDEF if no verification code is provided.
The verification code is marked on the device label which is the same as IP cam. If there is no code on the label, please connect the DVR/NVR with a monitor locally and go to Configuration>Network>Extranet Access to input one. Preview via web browser 1. Visit the site http://www.ezviz7.com with your browser. Note: IE8 or higher version and latest version of Chrome are supported. 2. Click on the top right corner to register an account and then click Next.
3. Check your Email for the verification code and input the code in the form. 4. Download and install the Plug-in for your browser if it’s the first time you use ezviz. Or you can go to the bottom of the homepage to download plug-in manually. 5. Visit www.ezviz7.com again and log in with your account, then click the User Name (here is ) on the top right corner to enter your ezviz device management page.
6. Go to System Management>Device Management, click or to enter the adding device interface. Two methods are provided for adding the device, which are Add Automatically and Add by Serial No.. Add Automatically: The devices with the same subnet where your computer locates will be automatically detected and listed. Add by Serial No.: Input and search the serial No. manually. 7. 8. 9. Select the device and click to add. In the pop-up dialog box, input the verification code of the device.
3. 4. b) Enter your Email address and the CAPTCHA code into the corresponding text boxes. Click Next to get the verification code which will be sent to your Email. c) Enter the verification number and click Next to start the account settings. d) Enter an available username and password into the corresponding text boxes, Click OK to complete the settings Open the software and enter the login page. Enter the correct username and password. Click Login to log into the system. Add the device.
5. In My Camera page, click the icon video of the required scene. on the thumbnail of the device to view real-time Preview via client software ivms-4200 1. 2. 3. Download and install the specific version of ivms-4200 which supports ezviz device. Register the software and log in. Go to Control Panel>Device Management>Server>Add New Device Type to enable “Device on Cloud”.
4. Go to Device on Cloud Page and click Register to create a new account. 5. Go to Login page and enter the user name and password.
6. Click Add Device, input Serial No. and Verification Code and then click OK. 7. Import the encoding channel(s). A new group named after the account name will be created by default, or you can also import the camera(s) on the Import interface.
8. Input the Encryption Key. Go to Group in Device Management Page, click “hik_test” and you will see the device is listed at the right side. Double click the encoding channel and input the Encryption Key in the pop-up page. The default key is ABCDEF. You can also modify the key in Device Management Page of your ezviz account via web browser. 9. Go to Control Panel>Main View to check the real time video.
FAQ Web Browser Plug-in Q: I have registered an account and entered the plug-in download interface. Why does the prompt of downloading the plug-in pop up again after I have finished installing the plug-in according to the prompts? A: Please clear the cache of your web browser and uninstall the plug-in, and download and install it again. If it does not work, we recommend you to use the latest version of Google Chrome.
A: 1. Please confirm that your device is in the same LAN and check your network configuration for IP/Subnet Mask/Gateway/DNS server. 2. If it doesn't work, please close anti-virus software of your PC. 3. If it doesn't work, please try to add the device via the serial No. Add the Device Q: Why does it show to me that the device has been added by other user? A: The device which supports ezviz can only be added by one user. So please check if it is added by others.
HIKVISION Technical Support Department First Choice for Security Professionals
