Quick Operation Guide
Table Of Contents
- NVR Installation
- Hard Disk Installation
- Front Panel
- Rear Panel
- Peripheral Connections
- Specifications
- Specifications of DS-8600NI-E8
- Specifications of DS-7700NI-E4
- Specifications of DS-7700NI-E4/P
- Specifications of DS-7600NI-E2
- Specifications of DS-7600NI-E1
- Specifications of DS-7604NI-E1/N and DS-7608NI-E2/N
- Specifications of DS-7616&7632NI-E2/N
- Specifications of DS-7604NI-E1/P and DS-7608NI-E2/P
- Specifications of DS-7616&7632NI-E2/P
- HDD Storage Calculation Chart
- Menu Operation
- Accessing by Web Browser
Quick Operation Guide of Network Video Recorder
8
Steps (for other models):
1. Remove the cover from the NVR by unfastening the screws on the rear and side panel.
2. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.
3. Connect the power cable to the HDD.
4. Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD.
5. Re-install the cover of the NVR and fasten screws.