User Manual

User Manual of Network Video Recorder
172
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the More Settings tab to enter the More Settings interface.
3. Check the checkbox of Enable High-speed Download. And click the OK button in the pop-up message box
to confirm the settings.
Figure 11. 30 High-speed Download Settings Menu
Figure 11. 31 Message Box of High-speed Download
4. Click Apply button to save and exit the interface.
11.2.11 Configuring Virtual Host
Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Steps:
1. Enter the Advanced settings interface, as shown in the Figure 11. 32.
Configuration > Remote Configuration > Network Settings > Advanced
Figure 11. 32 Advanced Settings Interface
2. Check the checkbox of the Enable Virtual Host.
3. Click the Save button to save the setting.
4. Enter the IP camera management interface of NVR. The Connect column appears on the right-most side of
the camera list, as shown in the Figure 11. 33.
Configuration > Remote Configuration > Camera Management > IP Camera