How to add third-party IP camera to NVR with Plug& Play method Quick Guide HIKVISION TECHNICAL SUPPORT TEAM 2016-6-2
1 How to configure HTTPS How to add third-party IP camera to NVR with Plug& Play method Hikvision /P series NVR support Plug& Play function, it can access to IP cameras with POE ports. Currently Hikvision NVR’s POE ports can access to IP cameras with HIKVISION protocol or ONVIF protocol. This operation guide will show you steps to add third-party IP cameras. Go to NVR’s local interface- Camera, edit IP camera, set the adding mode to Plug& Play. Check the Internal NIC IPv4 Address of NVR.
2 How to configure HTTPS Login in IP camera’s webpage, set the IP address in same network segment with NVR’s Internal NIC IPv4 Address. Notice that the last number of IP address must be bigger than 100. Such as 192.168.254.101, 10.9.5.103. Before connecting IP cameras to NVR’s POE ports, make sure IP camera’s password is 12345 or same with NVR’s admin password. Besides, IP camera should meet AF/AT 802.3a standard and support ONVIF protocol.
3 How to configure HTTPS First Choice for Security Professionals Hikvision Technical Support © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
