Quick Start Guide

Network Video Recorder Quick Start Guide
29
Step 3 In the General Settings interface, you can configure the following settings: NIC Type, IPv4
Address, IPv4 Gateway, MTU, and DNS Server.
Step 4 If the DHCP server is available, you can check DHCP to automatically obtain an IP address
and other network settings from that server.
Step 5 After having configured the general settings, click the Apply button to save the settings.
3.7 Add IP Cameras
Purpose:
Before you view live video or record video files, you must add network cameras to the device.
Before You Start:
Ensure the network connection is valid and the IP camera has been activated.
Step 1 Click on the main menu.
Step 2 Click Custom Add.
Step 3 Set IP Camera Address, Protocol, Management Port, Transfer Protocol, User Name, and
Password. Management Port ranges from 1 to 65535.
Figure 3-6 Add IP Camera
Step 4 (Optional) Check Use Channel Default Password to use the default password to add the camera.
Step 5 (Optional) Check Use Default Port to use the default management port to add the camera. For
SDK service, the default port value is 8000. For enhanced SDK service, the default value is 8443.