User Manual

Figure 1-14 Protocol Management
2. Set protocol parameters.
Type
The network camera adopng custom protocol must support geng stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
geng main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
3. Click OK.
Aer adding the customized protocol, you can see it in Protocol.
1.5
Plaorm Access
1.5.1 Congure EHome
EHome protocol is non-open and push-mode protocol based on TCP/UDP, which can realize the
communicaon between the system and mobile devices (e.g., body camera, MNVR, etc.). The
system is as a server and you can register the device to the system. The protocol is suitable for the
applicaon of dynamic device IP address.
Steps
1. Go to System → Network → Advanced →
Plaorm Access .
Network Video Recorder User Manual
13