User Manual

Figure 6-4 Facial Detecon
3. Select a camera to congure.
4. Check Enable Face Detecon.
5. Oponal: Check Save VCA Picture to save the captured pictures of face detecon.
6. Set the detecon sensivity. Sensivity range: [1-5]. The higher the value is, the more easily the
face will be detected.
7. Set the arming schedule. Refer to
Congure Arming Schedule
8. Set linkage acons. Refer to Congure Linkage Acons
9. Click Apply.
6.2.2 Temperature Screening
Aer connecng with specied thermography cameras, the device can display temperature
measurement results, and
nofy you with audio alert when normal or abnormal temperature is
detected.
Before You Start
Ensure your thermography camera support this funcon, and it is properly congured.
Steps
1. Go to System → Event → Smart Event .
2. Select the
opcal channel of thermography camera.
3. Click Face Capture.
4.
Oponal: Check Save VCA Picture to save the captured pictures of face detecon.
5. Set the arming schedule. Refer to Congure Arming Schedule .
Network Video Recorder User Manual
56