User Manual

3. Click Loitering
Detecon.
Figure 6-11 Loitering Detecon
4. Check Enable Loitering Detecon..
5. Oponal: Check Save VCA Picture to save the captured loitering detecon pictures.
6. Set loitering
detecon parameters.
1) Select Arming Region. Up to 4 regions are selectable.
2) Set Time Threshold.
Time Threshold
The
me of car staying in the region. If the value is 10, an alarm is triggered aer the car
has stayed in the region for 10s. Its range is [1s-10s].
3) Set
Sensivity.
Sensivity
Similarity of the background image to the object. The higher the value, the easier the
detecon alarm will be triggered.
7. Set the arming schedule.Refer to Congure Arming Schedule
8. Set the linkage
acons. Refer to Congure Linkage Acons
9. Click Apply.
6.2.9 People Gathering
Detecon
People gathering detecon is used to detect whether the density of human bodies within a
specied area exceeds the set value and trigger alarm for linked acons.
Steps
1. Go to System → Event → Smart Event .
2. Select a camera to
congure.
3. Click People Gathering.
Network Video Recorder User Manual
63