How to Guide

2 How to configure HTTPS
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Login in IP camera’s webpage, set the IP address in same network segment with NVR’s Internal
NIC IPv4 Address. Notice that the last number of IP address must be bigger than 100. Such
as 192.168.254.101, 10.9.5.103.
Before connecting IP cameras to NVR’s POE ports, make sure IP camera’s password is 12345
or same with NVR’s admin password. Besides, IP camera should meet AF/AT 802.3a standard
and support ONVIF protocol.
Connect IP camera to NVR’s POE ports, NVR will automatically access to IP camera.