How to Guide

6. Or configure it via web browser in the interface below.
Note:
The time synchronization interval can be set from1 to 10080min, and the default value is
60min. If the NVR is connected to a public network, you should use a NTP server that has a
time synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the NVR is setup in a more customized network, NTP software can be used
to establish a NTP server used for time synchronization.
How to configure DST:
Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Choose DST Settings tab.