How to Guide

You can check the checkbox of Auto DST Adjustment item.
Or you can manually check the Enable DST checkbox, and then you choose the date/time of
the DST period.
3. Or configure it via web browser in the interface below.
Note:
1. When it is daylight saving time, if you just enable NTP without DST enabled, your device
time may not be synchronized with local DST time. The solution is to enable DST.
2. If you have an IPC added to NVR, just set NTP and DST in NVR would be OK. The
device time of IPC would be synchronized by NVR.