How to Guide

ManualsBrandsHikvision ManualsNetwork Products16-ch 1.5U 4K NVR

Title:

How to watch Smart Playback in NVR

Version:

v1.0

Date:

12/13/2018

Product:

Cameras, NVR

Page:

1 of 8

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788

E-Mail: support@hikvision.com • www.hikvision.com

How to watch Smart Playback in NVR

Description

The smart playback function provides an easy way to get through the less effective information. When

you select the smart playback mode, the system will analyze the video containing the motion or VCA

information. It will mark it with red color and play it in normal speed, while the video without motion

will be played in the 16-time speed（the speed function can be configurable, -E/-Q is not supported）.

The smart playback rules and areas are configurable.

Note: This speed function is now supported by almost all -K/-I/-super I series NVR.

Preparation

To get the smart search result, the Dual-VCA must be enabled in NVR.

Steps:

1. Enter Configuration interface by Web.

2. Select Video/Audio on the top-left side and Display Info. on Stream.

3. Click Enable Dual-VCA and Save button.

Summary of content (8 pages)

PAGE 1
Title: Product: How to watch Smart Playback in NVR Cameras, NVR Version: v1.0 Date: Page: 12/13/2018 1 of 8 How to watch Smart Playback in NVR Description The smart playback function provides an easy way to get through the less effective information. When you select the smart playback mode, the system will analyze the video containing the motion or VCA information.
PAGE 2
Title: Product: How to watch Smart Playback in NVR Cameras, NVR Version: v1.0 Date: Page: How to configure Smart Event: 1) In Web (take Line Crossing Detection as example) Steps: 1. Enter Configuration interface and select Event in the drop-down list on the top-left side. 2. Select Smart Event in the following menu. 3. Select a camera in the camera list. 4. Select Line Crossing Detection and click Enable Line Crossing Detection. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
PAGE 3
Title: Product: How to watch Smart Playback in NVR Cameras, NVR Version: v1.0 Date: Page: 5. Click Draw Area and take the line in the needed area and click Save button. 2) In Local (take Line Crossing Detection as example) Steps: 1. Enter System interface and select Event in the drop-down list on the top-left side. 2. Select Smart Event in the following menu. 3. Select a camera in the camera list. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.
PAGE 4
Title: Product: How to watch Smart Playback in NVR Cameras, NVR Version: v1.0 Date: Page: 4. Select Line Crossing and click Enable Line Crossing Detection. 5. Click Draw Area and take the line in the needed area and click Apply button. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: support@hikvision.com • www.hikvision.
PAGE 5
Title: Product: How to watch Smart Playback in NVR Cameras, NVR Version: v1.0 Date: Page: 12/13/2018 5 of 8 How to use Smart detection in playback: 1) In Web (take Line Crossing Detection as example) Steps: 1. Enter Playback interface, select the camera in the drop-down list on the top-left side and the date in the right side. 2. Select -> in the left bottom 3. Draw two points in the wanted area. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.
PAGE 6
Title: Product: How to watch Smart Playback in NVR Cameras, NVR Version: v1.0 Date: Page: 12/13/2018 6 of 8 2) In Local (take Line Crossing Detection as example) Steps: 1. Enter Playback interface, select the camera and the date in the drop-down list on the top-left side. 2. Select Smart button in the bottom. 3. Select in the middle of the screen. 4. Draw two points in the wanted area. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.
PAGE 7
Title: Product: How to watch Smart Playback in NVR Cameras, NVR Version: v1.0 Date: Page: 12/13/2018 7 of 8 How to watch Smart Play back in speed: Steps: 1. Enter Playback interface, select the camera and the date in the drop-down list on the top-left side. 2. Select Smart button in the bottom. 3. Click in the bottom of the screen. 4. Choose the wanted speed. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.
PAGE 8
Title: Product: How to watch Smart Playback in NVR Cameras, NVR Version: v1.0 Date: Page: First Choice for Security Professionals HIKVISION Technical Support © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: support@hikvision.com • www.hikvision.