How to print NVR information via SSH Quick Guide HIKVISION TECHNICAL SUPPORT TEAM 2016-5-12
1 How to configure HTTPS How to print NVR information via SSH In order to collect NVR’s running status information, traditionally a serial port line is required to print running information. After V3.4.6 (I/K series) and V3.2.5 (F series) are released, I/K/F series NVR now support SSH protocol. SSH protocol can establish a secure link between NVR and client, NVR’s running status information can be transmitted through network. Notice that this function can only be used in Local Area Network.
2 How to configure HTTPS Input the password of NVR and click OK. Now you can test and debug the device. Notice that u-boot mode is not supported through SSH protocol. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
3 How to configure HTTPS First Choice for Security Professionals Hikvision Technical Support © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
