User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 115
Figure 12-3 Set Motion Detection
Step 2 Select the camera to configure the motion detection.
Step 3 Check Enable.
Step 4 Set the motion detection area.
• Full screen: Click to set full-screen motion detection for the image.
• Customized area: Click-and-drag the mouse on the preview screen to draw the
customized motion detection area(s).
Step 5 Click Clear to clear the current motion detection area settings and draw again.
Step 6 Set sensitivity (0-100). The sensitivity allows you to calibrate how readily movement
triggers the alarm. A higher value more readily triggers motion detection.
Step 7 Set the arming schedule. Refer to Chapter 12.1 Configuring Arming Schedule.
Step 8 Set the linkage actions. Refer to Chapter 12.2 Configuring Alarm Linkage Actions.