User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 148
Figure 15-7 Overlay Character Settings
Drag the frame to adjust the textbox size and position on the POS settings
interface preview screen.
Step 8 Click Apply to activate the settings.
15.2 Configuring POS Alarm
Purpose
A POS event can trigger channels to start recording, trigger full screen monitoring or an audio
warning, notify the surveillance center, send e-mail, etc.
Step 1 Go to Storage > Recording Schedule.
Step 2 Set the POS event’s arming schedule.
Step 3 Go to System > POS Settings.
Step 4 Click the Event Linkage tab on the POS adding or editing interface.
Step 5 Select the normal linkage actions: full screen monitoring, audio warning, or send
e-mail.
Step 6 Select one or more alarm output(s) to trigger.
Step 7 Select one or more channels to record or become full-screen monitoring when a POS
alarm is triggered.