User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 155
Figure 16-5 NTP Settings
Step 2 Check Enable.
Step 3 Configure NTP settings as need.
• Interval (min): Time interval between two time synchronization with NTP server
• NTP Server: IP address of the NTP server
• NTP Port: Port of the NTP server
Step 4 Click Apply.
16.6 Configuring SNMP
Purpose
You can configure SNMP settings to get device status and parameter information.
Before You Start
Download the SNMP software to receive device information via the SNMP port. By setting the
trap address and port, the device is allowed to send alarm events and exception messages to
the surveillance center.
Step 1 Go to System > Network > Advanced > SNMP.