User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 179
- Remote Camera Management: Remote adding, deleting, and editing IP
cameras.
- Remote Serial Port Control: Configuring RS-232 and RS-485 port settings.
- Remote Video Output Control: Sending remote button control signals.
- Two-Way Audio: Operating the two-way radio between the remote client
and the device.
- Remote Alarm Control: Remotely arming (notify alarm and exception
message to the remote client) and controlling the alarm output.
- Remote Advanced Operation: Remotely operating HDD management
(initializing HDD, setting HDD property), upgrading system firmware,
clearing I/O alarm output.
- Remote Shutdown/Reboot: Remotely shutting down or rebooting the
device.
• Camera Configuration
- Remote Live View: Remotely viewing live video of the selected
camera(s).
- Local Manual Operation: Locally starting/stopping manual recording and
alarm output of the selected camera(s).
- Remote Manual Operation: Remotely starting/stopping manual recording
and alarm output of the selected camera(s).
- Local Playback: Locally playing back recorded files of the selected
camera(s).
- Remote Playback: Remotely playing back recorded files of the selected
camera(s).
- Local PTZ Control: Locally controlling PTZ movement of the selected
camera(s).
- Remote PTZ Control: Remotely controlling PTZ movement of the selected
camera(s).
- Local Video Export: Locally exporting recorded files of the selected
camera(s).
- Local Live View: View live video of the selected camera(s) locally.
Step 4 Click OK to save the settings.