User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 181
19.4.4 Editing the Admin User
You can modify the admin user account’s password and unlock pattern.
Step 1 Go to System > User.
Step 2 Select the admin user from the list and click Modify.
Figure 19-9 Edit User (Admin)
Step 3 Edit the admin user information as desired, including a new admin password
(strong password is required) and MAC address.
Step 4 Edit the unlock pattern for the admin user account.
1) Check the Enable Unlock Pattern checkbox to enable the use of an unlock
pattern when logging in to the device.
2) Use the mouse to draw a pattern among the nine dots on the screen, and
release the mouse when the pattern is done.
Refer to Chapter 3.3 Configuring the Login Unlock Pattern for detailed instructions.