How to Guide

Title:
How to use Redundancy Record in Group Mode
Version:
v1.0
Date:
1/8/2019
Product:
NVR
Page:
1 of 4
© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Tel: +86-571-8807-5998 • Fax: +1 909-595-0788
E-Mail: support@hikvision.com www.hikvision.com
How to use Redundancy Record in Group Mode
Description
The customer may have the request to save the video record backup.
Note: This function need more than two hard disks and the redundancy must be used in group mode.
Preparation
NVR.
How to configure the group function in NVR:
Steps:
1. Enter Storage interface and select Storage Mode in the drop-down list on the top-left side.
2. Select Group mode in the right.
3. Click the channel which need to be record in redundancy and Apply.
4. Wait for the system rebooting.

Summary of content (4 pages)