User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 032918NA 207
3. Enter information for the new user, including User Name, Password,
Confirm, Level, and User’s MAC Address.
• Password: Set the password for the user account.
STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your
own choosing (using a minimum of eight characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters) in order to increase the security
of your product. We also recommend that you reset your password regularly. Especially in a high
security system, resetting the password monthly or weekly can better protect your product.
• Level: Set the user level to Operator or Guest. Different user levels
have different operating permission.
• Operator: The Operator user level has permission of Two-way Audio
in Remote Configuration and all operating permissions in Camera
Configuration by default.
• Guest: The Guest user has no permission of Two-way Audio in Remote
Configuration and only has the local/remote playback in the Camera
Configuration by default.
• User’s MAC Address: The MAC address of the remote PC that logs
onto the DVR. If it is configured and enabled, it allows only the remote
user with this MAC address to access the DVR.
• Click O
K to save the settings and go back to the User Management
interface. The added new user will be displayed on the list, as shown
below.
Figure 291, Added User Listed in User Management Interface
• You can assign permissions for the added user.
1) Select the user from the list and then click to enter the
Permission Settings interface, as shown below.