Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 173
Chapter 19 General System Settings
19.1 Configuring General Settings
Purpose
You can configure the BNC output standard, VGA output resolution, and mouse pointer speed
in the System > General interface.
Step 1 Go to System > General.
Figure 19-1 General Settings Interface
Step 2 Configure the following settings.
• Language: The default language used is English .
• Output Standard: Set the output standard to NTSC or PAL, which must be the same
as the video input standard.
• Resolution: Configure the video output resolution.
• Device Name: Edit the name of the device
• Device No.: Edit the device serial number. The Device No. can be set in the range of
1 to 255, and the default No. is 255. The number is used for the remote and
keyboard control.