User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 165
Figure 18-3 S.M.A.R.T. Settings Interface
To use the HDD even when S.M.A.R.T. checking has failed, check the Continue to
use the disk when self-evaluation is failed checkbox.
18.1.3 Bad Sector Detection
Step 1 Go to Maintenance > HDD Operation > Bad Sector Detection.
Step 2 Select the HDD No. you want to configure in the drop-down list.
Step 3 Select All Detection or Key Area Detection as the detection type.
Step 4 Click Self-Test to start the detection.