User Manual

ManualsBrandsHikvision ManualsElectronics64 Channels Network Video Recorder, No HDD

Table Of Contents

Introduction
- 1.1 Front Panel
- 1.2 IR Remote Control Operations
  - Pairing (Enabling) the IR Remote to a Specific Device (optional)
  - Unpairing (Disabling) an IR Remote from a Device
- 1.3 USB Mouse Operation
- 1.4 Rear Panel
Chapter 2 Getting Started
- 2.1 Start up the Device
- 2.2 Activate the Device
- 2.3 Configure Login Unlock Pattern
- 2.4 Login to the Device
  - 2.4.1 Log in via Unlock Pattern
  - 2.4.2 Log in via a Password
- 2.5 Start Setup Wizard
- 2.6 Enter Main Menu
- 2.7 System Operation
Chapter 3 Camera Management
- 3.1 Add IP Cameras
  - 3.1.1 Add IP Cameras Manually
  - 3.1.2 Add the Automatically Searched Online IP Cameras
- 3.2 Manage Cameras for PoE Device
- 3.3 Enable the H.265 Stream Access
- 3.4 Upgrade the IP Camera
- 3.5 Configure the Customized Protocols
Chapter 4 Camera Settings
- 4.1 Configure OSD Settings
- 4.2 Configure Privacy Mask
- 4.3 Configure the Image Parameters
- 4.4 Configure the Day/Night Switch
- 4.5 Configure Other Camera Parameters
Chapter 5 Live View
- 5.1 Start Live View
- 5.2 Target Detection
- 5.3 Configure Live View Settings
- 5.4 Configure Live View Layout
  - 5.4.1 Configure Custom Live View Layout
  - 5.4.2 Configure Live View Mode
- 5.5 Configure Camera Auto-Switch
- 5.6 Configure Channel-Zero Encoding
Chapter 6 PTZ Control
- 6.1 PTZ Control Wizard
- 6.2 ConfigurePTZ Parameters
- 6.3 Set PTZ Presets, Patrols, and Patterns
- 6.4 Auxiliary Functions
Chapter 7 Storage
- 7.1 Storage Device Management
- 7.2 Storage Mode
  - 7.2.1 Configure HDD Groups
  - 7.2.2 Configure HDD Quota
- 7.3 Recording Parameters
- 7.4 Configure Recording Schedule
- 7.5 Configure Continuous Recording
- 7.6 Configure Motion Detection Triggered Recording
- 7.7 Configure Event Triggered Recording
- 7.8 Configure Alarm Triggered Recording
- 7.9 Configure POS Event Triggered Recording
- 7.10 Configure Picture Capture
- 7.11 Configure Holiday Recording and Capture
- 7.12 Configure Redundant Recording and Capture
Chapter 8 Disk Array (RAID)
- 8.1 Create a Disk Array
- 8.2 Rebuild an Array
- 8.3 Delete an Array
- 8.4 Check and Edit Firmware
Chapter 9 File Management
- 9.1 Search and Export All Files
  - 9.1.1 Search Files
  - 9.1.2 Export Files
- 9.2 Search and Export Human Files
  - 9.2.1 Search Human Files
  - 9.2.2 Export Human Files
- 9.3 Search and Export Vehicle Files
  - 9.3.1 Search Vehicle Files
  - 9.3.2 Export Vehicle Files
- 9.4 Search History Operation
  - 9.4.1 Save Search Conditions
  - 9.4.2 Call Search History
Chapter 10 Playback
- 10.1 Play Video Files
- 10.2 Playback Operations
Chapter 11 Event and Alarm Settings
- 11.1 Configure Arming Schedule
- 11.2 Configure Alarm Linkage Actions
- 11.3 Configure Motion Detection Alarms
- 11.4 Configure Video Loss Alarms
- 11.5 Configure Video Tampering Alarms
- 11.6 Configure Sensor Alarms
- 11.7 Configure Exceptions Alarms
- 11.8 Setting Alarm Linkage Actions
- 11.9 Trigger or Clear Alarm Output Manually
Chapter 12 VCA Event Alarm
- 12.1 Face Detection
- 12.2 Vehicle Detection
- 12.3 Line Crossing Detection
- 12.4 Intrusion Detection
- 12.5 Region Entrance Detection
- 12.6 Region Exiting Detection
- 12.7 Unattended Baggage Detection
- 12.8 Object Removal Detection
- 12.9 Audio Exception Detection
- 12.10 Sudden Scene Change Detection
- 12.11 Defocus Detection
- 12.12 PIR Alarm
- 12.13 Thermal Camera Detection
Chapter 13 Smart Analysis
- 13.1 People Counting
- 13.2 Heat Map
Chapter 14 POS Configuration
- 14.1 Configure POS Settings
  - 14.1.1 Configure POS Connection
  - 14.1.2 Configure POS Text Overlay
- 14.2 Configure POS Alarm
Chapter 15 Network Settings
- 15.1 Configure TCP/IP Settings
  - 15.1.1 Device with Dual Network Interface
  - 15.1.2 Device with a Single Network Interface
- 15.2 Configure Hik-Connect
- 15.3 Configure DDNS
- 15.4 Configure PPPoE
- 15.5 Configure NTP
- 15.6 Configure SNMP
- 15.7 Configure Email
- 15.8 Configure Ports
Chapter 16 Hot Spare Device Backup
- 16.2 Set Hot Spare Device
- 16.3 Set Working Device
- 16.4 Manage Hot Spare System
Chapter 17 User Management and Security
- 17.1 Manage User Accounts
- 17.2 Manage User Permissions
- 17.3 Configure Password Security
  - 17.3.1 Export GUID File
  - 17.3.2 Configure Security Questions
- 17.4 Reset Password
  - 17.4.1 Reset Password by GUID
  - 17.4.2 Reset Password by Security Questions
Chapter 18 System Service Maintenance
- 18.1 Storage Device Maintenance
- 18.2 Search and Export Log Files
  - 18.2.1 Search the Log Files
  - 18.2.2 Export the Log Files
- 18.3 Import/Export IP Camera Configuration Files
- 18.4 Import/Export Device Configuration Files
- 18.5 Configure System Services
  - 18.5.1 Control4 Protocol
  - 18.5.2 I-VIEW-NOW UPNP Reporting
- 18.6 Configure Stream Encryption
- 18.7 Upgrade the System
  - 18.7.1 Upgrade with a Local Backup Device
  - 18.7.2 Upgrade by FTP
- 18.8 Restore Default Settings
Chapter 19 General System Settings
- 19.1 Configure General Settings
- 19.2 Configure Date & Time
- 19.3 Configure DST Settings
Chapter 20 Appendix
- 20.1 Glossary
- 20.2 Troubleshooting
- 20.3 Summary of Changes
- 20.4 List of IP Cameras Connected to PoE by Long Network Cable (100 - 300 m)

Network Video Recorder User Manual

Step 6 Select the recording type to Motion.

Step 7 Drag the mouse on the time bar to set the motion detection recording schedule. Refer to Chapter

7.4 Configure Recording Schedule for details.

7.7 Configure Event Triggered Recording

You can configure the recording triggered by the motion detection, motion detection and alarm,

face detection, vehicle detection, line crossing detection, etc.

Step 1 Go to System > Event.

Step 2 Configure the event detection and select the channel (s) to trigger the recording when event

occurs. Refer to Chapter 11 Event and Alarm Settings and Chapter 12 VCA Event Alarm for details.

Step 3 Go to Camera > Encoding Parameters > Recording Parameters.

Step 4 Set the event main stream/sub-stream recording parameters for the camera.

Step 5 Go to Storage > Recording Schedule.

Step 6 Select the recording type to Event.

Step 7 Drag the mouse on the time bar to set the event detection recording schedule. Refer to Chapter

7.4 Configure Recording Schedule for details.

7.8 Configure Alarm Triggered Recording

You can configure the recording triggered by the motion detection, face detection, vehicle

detection, line crossing detection, etc.

Step 1 Go to System > Event > Normal Event > Alarm Input.

Step 2 Configure the alarm input and select the channel (s) to trigger the recording when alarm occurs.

Refer to Chapter 11 Event and Alarm Settings and Chapter 12 VCA Event Alarm for details for

details.

Step 3 Go to Camera > Encoding Parameters > Recording Parameters.

Step 4 Set the event main stream/sub-stream recording parameters for the camera.

Step 5 Go to Storage > Recording Schedule.

Step 6 Select the recording type to Alarm

Step 7 Drag the mouse on the time bar to set the alarm recording schedule. Refer to Chapter 7.4

Configure Recording Schedule for details.