User Manual

User Manual of Network Video Recorder User Manual
62
(Configuration > Camera Settings >Schedule Settings > Advanced) to save the recording files in the IP
camera when the network is disconnected, and synchronize the files to the NVR when the network is
resumed.
 The redundant record/capture is used when you want to save the record files or captured pictures in the
redundant HDD. You must configure the redundant HDD in HDD settings. For detailed information,
see Chapter 13.4.2.
 The parameters of Main Stream (Event) are read-only.
3. Parameters Settings for Sub-stream
1) Enter the Sub-stream tab page.
Figure 5. 5 Sub-stream Parameters
2) Configure the parameters of the camera.
3) Click Apply to save the settings.
4. Parameters Settings for Capture
1) Select the Capture tab.
Figure 5. 6 Capture Parameters
2) Configure the parameters.
3) Click Apply to save the settings.
The interval is the time period between two capturing actions. You can configure all the parameters on this menu
on your demand.