User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Preface
- Chapter 1 Product Introduction
- Chapter 2 Device Activation and Login
- Chapter 3 Client Configuration and Operation
- 3.1 Wizard
- 3.2 Signal Input Type Configuration
- 3.3 Display Adjustment
- 3.4 Volume Adjustment
- 3.5 Configure a Scene
- 3.6 Add Device Alias
- 3.7 Configure Message
- 3.8 Configure OSD
- 3.9 Configure Network
- 3.10 Configure No-Signal Screensaver
- 3.11 Configure On/off Image
- 3.12 Configure Multicast Control
- 3.13 Configure Video Window Opening
- 3.14 Configure Screen Splicing
- Chapter 4 Device Maintenance
- Chapter 5 System Maintenance
- Chapter 6 Local Configuration and Operation
- Chapter 7 FAQ
- 7.1 Full Screen is Unlit
- 7.2 Image is Incomplete or in Wrong Position
- 7.3 Full-screen Image Flashes or Vibrates
- 7.4 Spots/Strips Exist in Full-screen Image
- 7.5 Certain Unit Image Flashes or Has Spots
- 7.6 Certain Unit Screen is Unlit
- 7.7 Certain Module or Row of Modules are Unlit in Unit
- 7.8 Screen Display Error When Smart Settings
- 7.9 Searching Online Device Fail
3.10 Congure No-Signal Screensaver
The screen will display default no-signal screensaver when there is week input signal or no input
signal.
Steps
Note
You can choose default mode, custom mode, and black screen mode. Here we take custom mode
as an example.
1. Click Screen Adjustment → Basic Control → No-Signal Screensaver .
Figure 3-15 No-Signal Screensaver Conguraon
2. Click Custom.
3. Click Select Picture to select the pictures.
4. Click Upload.
Note
• The picture format only can be JPG and
resoluon should be between 320 * 240 and 3840 *
3840.
• If you upload more than one picture, the pictures will be auto switches automacally when
the screensaver displays.
5. Oponal: Check Random Play.
6. Oponal: select Picture Auto-Switch Interval.
System will auto-switch pictures randomly according to the interval when there is no input
signal.
Full-Color LED Display Controller User Manual
22