User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Preface
- Chapter 1 Product Introduction
- Chapter 2 Device Activation and Login
- Chapter 3 Client Configuration and Operation
- 3.1 Wizard
- 3.2 Signal Input Type Configuration
- 3.3 Display Adjustment
- 3.4 Volume Adjustment
- 3.5 Configure a Scene
- 3.6 Add Device Alias
- 3.7 Configure Message
- 3.8 Configure OSD
- 3.9 Configure Network
- 3.10 Configure No-Signal Screensaver
- 3.11 Configure On/off Image
- 3.12 Configure Multicast Control
- 3.13 Configure Video Window Opening
- 3.14 Configure Screen Splicing
- Chapter 4 Device Maintenance
- Chapter 5 System Maintenance
- Chapter 6 Local Configuration and Operation
- Chapter 7 FAQ
- 7.1 Full Screen is Unlit
- 7.2 Image is Incomplete or in Wrong Position
- 7.3 Full-screen Image Flashes or Vibrates
- 7.4 Spots/Strips Exist in Full-screen Image
- 7.5 Certain Unit Image Flashes or Has Spots
- 7.6 Certain Unit Screen is Unlit
- 7.7 Certain Module or Row of Modules are Unlit in Unit
- 7.8 Screen Display Error When Smart Settings
- 7.9 Searching Online Device Fail
3.11 Congure On/o Image
You can use the screen saver as the on/o image or customize the image. Take customizing the
on/o image as an example.
Steps
1. Click Screen Adjustment → Advanced
Operaon → On/O Image .
Figure 3-16 On/O Image Conguraon
2. Click Custom, and click Select Image to select an image in your computer.
3. Click Upload.
Note
Only images in JPG format with resoluon from 320 × 240 to 3840 × 3840 are available.
3.12 Congure Mulcast Control
Through mulcast funcon, you can control and congure several devices simultaneously.
Steps
Mulcast
In computer networking, mulcast is group communicaon where informaon is addressed to a
group of
desnaon computers simultaneously. Mulcast can be one-to-many distribuon.
1. Click Screen Adjustment → Advanced Operaon → Mulcast Control .
2. Check Enable
Mulcast.
Full-Color LED Display Controller User Manual
23