User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Preface
- Chapter 1 Product Introduction
- Chapter 2 Device Activation and Login
- Chapter 3 Client Configuration and Operation
- 3.1 Wizard
- 3.2 Signal Input Type Configuration
- 3.3 Display Adjustment
- 3.4 Volume Adjustment
- 3.5 Configure a Scene
- 3.6 Add Device Alias
- 3.7 Configure Message
- 3.8 Configure OSD
- 3.9 Configure Network
- 3.10 Configure No-Signal Screensaver
- 3.11 Configure On/off Image
- 3.12 Configure Multicast Control
- 3.13 Configure Video Window Opening
- 3.14 Configure Screen Splicing
- Chapter 4 Device Maintenance
- Chapter 5 System Maintenance
- Chapter 6 Local Configuration and Operation
- Chapter 7 FAQ
- 7.1 Full Screen is Unlit
- 7.2 Image is Incomplete or in Wrong Position
- 7.3 Full-screen Image Flashes or Vibrates
- 7.4 Spots/Strips Exist in Full-screen Image
- 7.5 Certain Unit Image Flashes or Has Spots
- 7.6 Certain Unit Screen is Unlit
- 7.7 Certain Module or Row of Modules are Unlit in Unit
- 7.8 Screen Display Error When Smart Settings
- 7.9 Searching Online Device Fail
Soluon
• Check if the power supply output of the unit is 5 VDC.
• Check if power supply indicator of the receiving card in the unit is solid red, or if the receiving
card is
operang normally.
• Check the receiving card, HUB card, and data cable
connecon in the unit.
• Check if the receiving card signal output of the previous unit is normal.
7.7 Certain Module or Row of Modules are Unlit in Unit
Reason
• The switching power output controlling the modules fails.
• The signal output controlling the modules fails.
Soluon
• Check if the power supply output of the modules is 5 VDC.
• Check the connecon of the data cable and the HUB card controlling the modules.
7.8 Screen Display Error When Smart
Sengs
Reason
Screen parameter is wrong.
Soluon
• Check if the resoluon of receiving card and output resoluon of graphics card is the same.
• Check if the smart
seng wizard parameter is correct.
7.9 Searching Online Device Fail
Reason
• The network cable of the sending card is not connected.
• Incorrect
soware installaon (the winp plugin is not installed or its version is incorrect).
Soluon
• Check network cable connecon.
• Reinstall the winp plugin, or update the winp plugin directly.
Full-Color LED Display Controller User Manual
40