Interactive Tablets User Manual
Interactive Tablet User Manual Legal Information ©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Interactive Tablet User Manual INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
Interactive Tablet User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Interactive Tablet User Manual (ii) le gain d'antenne maximal autorisé pour les appareils dans la bande 5725-5825 MHz doivent respecter le pire limites spécifiées pour le point-à-point et l'exploitation non point à point, le cas échéant.
Interactive Tablet User Manual potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Interactive Tablet User Manual Preface Applicable Models This manual is applicable to interactive tablet. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Interactive Tablet User Manual • Do not place the device in an environment where flammable and explosive matter are stored and used. • Do not place the device in an environment of flammable and corrosive gas. • Do not place the device in places like bathroom and kitchen. • Do not use damaged or unfit power socket. Make sure the plug and the socket are in good contact. • Do not parallel multiple plugs in one socket to avoid fire risk caused by power overload. • Do not approach the device with fire (e.g.
Interactive Tablet User Manual • Do not let children climb onto the device. • Keep small accessories away from children. • If the device will not be used for a long time. Shut down the power of the device and disconnect the power supply. • To avoid the risk of electric shock, please do not operate when the power is on. • Please do not plug and unplug the power cable frequently. • Make sure the power supply matches the requirements specified by the plate on the shell.
Interactive Tablet User Manual Contents Chapter 1 Introduction........................................................................................................................ 1 Chapter 2 Operation and Maintenance Precautions ......................................................................... 2 2.1 Use of Power Cable .................................................................................................................. 2 2.2 Cleaning and Maintenance .................................
Interactive Tablet User Manual 6.1.2 Wireless Network Settings............................................................................................ 17 6.1.3 WLAN Hotspot Settings ................................................................................................ 19 6.2 Display Settings ...................................................................................................................... 19 6.3 Audio Settings ................................................................
Interactive Tablet User Manual Chapter 1 Introduction The Interactive tablet (hereafter referred as 'the device') integrates functions of computers, projectors, interactive whiteboards, sound boxes, cameras (optional), HDTVs, advertising machines and so on.
Interactive Tablet User Manual Chapter 2 Operation and Maintenance Precautions The LCD panel on the device is made by high-precision technology. However, tiny spots on the screen that are always or never lit may be observed, or when observed from side, the color and brightness may appear to be uneven. Yet the above phenomena are common among LCD displays rather than faults and will not affect the performance of the device.
Interactive Tablet User Manual • • • • • • • • Make sure the power supply is grounded. Do not let dust or metal attachment adhere to the power plug and socket. Do not modify the cable in any form. Do not place heavy object on the cable. Keep the cable away from heat. Do not disconnect the power plug by pulling the cable. Keep the power cable away from physical or mechanical damage. The cable is applicable only to the Interactive Display. Do not use it on other devices. 2.
Interactive Tablet User Manual Chapter 3 Connection and Installation 3.1 Precautions for Installation • • • • • • • • • • • • Clean the device screen and back before installation for best performance. For safety, only use the wall mount or base provided by the manufacture. Contact professional staff for wall mounting. Check the accessories before the installation. Contact the dealer if anything is missing. Do not install the device too tight. Otherwise the screen may be distorted.
Interactive Tablet User Manual No. Description No. Description Short press to turn to power-saving status. Long press to turn on or turn off the device. 4 Power supply interface 100 to 240 VAC 12 Network interface 1 5 Power switch 13 External touch interface 6 HDMI output interface 14 RS-232 debug serial port 7 Multi-functional USB interface 15 Audio input interface 8 USB 2.0 interface 16 Audio output interface 3.
Interactive Tablet User Manual 3.4 Internal Computer Installation Figure 3-3 Internal Computer Installation The computer box is installed at the side slot of the device. When installing the box, make sure its ventilation hole is facing the same direction with the rear panel as shown above. Fasten the screws to fix the box into position. Warning • The computer is an optional accessory. • To avoid potential device damage, the computer box can be removed only after the device is disconnected from power. 3.
Interactive Tablet User Manual Wall Mounting Figure 3-4 Wall Mounting Rear View 7
Interactive Tablet User Manual Figure 3-5 Wall Mounting Side View Note The wall mount is mobile horizontally. Please leave a space no less than 6 cm at each side (or 12 cm at one side), and 5 mm at the top and bottom for maintenance service.
Interactive Tablet User Manual Mobile Mounting Figure 3-6 Mobile Mounting 9
Interactive Tablet User Manual Chapter 4 Startup and Shutdown 4.1 Device Startup 4.1.1 Installed Without a Computer Box Steps 1. Connect the device to power supply. 2. Turn on the power switch, the power indicator on the front panel will turn red. 3. Push the power button on the front panel to start up the device, the indicator will turn blue. 4.1.2 Installed with a Computer Box Install the box when the device is disconnected from power and turn on the power switch after the installation is finished.
Interactive Tablet User Manual Note Switching off the power of the device directly leads to force shutdown of the computer box. Next time the device starts up, Windows may enter error recovery mode and screen touch will be disabled. In this case, you need to connect a mouse and a keyboard to the device. • Long press the power-off button on the remote control.
Interactive Tablet User Manual Chapter 5 Menu Operations Note Software interfaces and functions may vary with device models. All pictures in this manual are for illustration purpose only. Turn on the device and go to the main page. The shortcut menu is displayed at the bottom of the screen. Figure 5-1 Main Page Note Long press the icons of applications on the main page to replace with the commonly-used ones. 5.1 Basic Operations Functions of the shortcut icons are described below.
Interactive Tablet User Manual No. Function No. Function Tap to configure network parameters. 3 Tap to select the input source. 9 Tap to adjust the brightness and volume. 4 Tap to check all the applications. Press and move the selected application to display in split view. 10 Tap to open the control menu. 5 Tap to return to the main page. 11 Tap to check notifications. 6 Tap to open all the windows of processes. -- -- 5.
Interactive Tablet User Manual Table 5-2 Control Menu Descriptions Tool Description Calculator Enable the built-in calculator. Note Take annotations on the current page. Camera Open the camera bound to the device. Screenshot Capture the current page. Stopwatch Measure the amount of time. Countdown Count seconds backwards to zero. Controller Enable the virtual controller. 5.4.1 Annotating Go to → Note to take annotations.
Interactive Tablet User Manual Icon Description Save the current page. When the device is connected to the Internet, you can tap to generate the annotation into a QR code, and any devices in the same LAN as the device can scan the QR code to download the annotation. Hide the tool in a floating window. Exit annotating. Note Up to 20 pens are allowed when lines with angled stroke is disabled, while only one when enabled. 5.4.2 Screenshot Go to → Screenshot , and a capture area pops up on the current page.
Interactive Tablet User Manual Chapter 6 System Settings The screen displays the main page after the device is turned on. Slide the screen to the left of right to view applications, device status, and help documents. 6.1 Network Settings The network status is displayed at the bottom of the screen (area 8 in Basic Operations ). Table 6-1 Different Network Status Icon Description Connected to a wired network. Connected to a wireless network. No network connected. 6.1.1 Wired Network Settings Steps 1.
Interactive Tablet User Manual Figure 6-2 Proxy Settings Static IP Settings When static IP enabled, you need to set network parameters, such as Static IP, Gateway, Subnet Mask, DNS1, and DNS2. Figure 6-3 Static IP Settings 6.1.2 Wireless Network Settings Steps 1. Go to Settings → Network → Wireless Network . 2. Enable WLAN, and you can add a new network or connect to an available network.
Interactive Tablet User Manual Connect to Available Networks • Tap the desired network in the available network list, and enter the password to connect. • Tap Connect, and network information page pops up. Tap Clear Network to delete the information of the selected network. Tap Cancel to exit the page. Figure 6-4 Wireless Network Information Add Other Networks Steps 1. Tap Add Other Networks. 2. Enter Wi-Fi name and select Security.
Interactive Tablet User Manual 3. Optional: Check Display Advanced Settings to select proxy and network IP type. 4. Tap Connect to connect the device to the added wireless network. 6.1.3 WLAN Hotspot Settings When the device is connected to the wired network, it can provide wireless network for other devices with WLAN hotspot enabled. Steps 1. Go to Settings → Network → Hotspot . 2. Enable Portable WLAN Hotspot. 3. Set parameters in the pop-up page.
Interactive Tablet User Manual Figure 6-7 Display Settings Auto Brightness The device can adjust brightness according to the environment automatically when enabled. Brightness Parameter Slide the slider to adjust the brightness of the screen. Bluelight Filter Enable the function to protect your eyes by filtering blue light. Wallpaper Tap to set dynamic wallpapers or pictures in the system as wallpaper. Sleep Set an inactivity period for sleep mode.
Interactive Tablet User Manual Figure 6-8 Audio Settings 2. Tap to select a mode from Standard, Music, Movie, and User as Audio Mode. 3. Set the parameters according to the audio mode. - In Standard, Music, and Movie mode, you can adjust Balance and Volume. - In User mode, you can adjust High Pitch, Low Pitch, Balanceand Volume. 4. Enable Noise Cancelling to eliminate the noise of echo. By default, this function is enabled.
Interactive Tablet User Manual Figure 6-10 Date and Time Settings 2. Enable Time Sync. 3. Tap Select Time Zone to select the region. 4. Optional: Enable 24-Hour Format to display the time in 24-hour format. Note If Time Sync is disabled, you can set date and time manually. 6.6 Application Management Steps 1. Go to Settings → Application Management . 2. Tap the desired application to check details. 3. You can perform operations, such as Forced Stop, Clear Data, Clear Cache, and Uninstall.
Interactive Tablet User Manual Figure 6-11 Intelligent Temperature Control 2. Enable Intelligent Detection. 3. Slide the slider to set Warning Temperature and Alarming Temperature. Note • When the temperature exceeds the set warning temperature, the temperature in status bar on the upper right corner turns red. • When the temperature exceeds the set alarming temperature, the temperature information pops up and prompts you to turn off the device. 6.9 Advanced Settings Select Settings → Advanced Settings .
Interactive Tablet User Manual Figure 6-13 Advanced Settings-2 E-mail Set the E-mail address for receiving shared contents from whiteboard. Meeting Server IP Address Set the IP address of meeting room server, and you can check meeting information or sign in for the meeting. Input Source Settings Startup Input Source Select the desired input source as the device starts up. You can select a built-in system, or an external input source.
Interactive Tablet User Manual Disable Copying from USB Disk If copying from USB disk is disabled, the device cannot read from external disks. QR Code Sharing Settings Share the content of whiteboard through a QR code. Any devices in the same LAN as the device can scan the QR code to download the content. Device Permission Settings Wake from Serial Port If this function is enabled, the device in standby status can be waken up by serial port command.
Interactive Tablet User Manual Chapter 7 Intelligent Applications 7.1 FileBrowser Tap FileBrowser on the main page. All the files under the current directory are shown by default. Tap Image, Doc, AV, or Installation Package to view specified files. Icons are described as follows. Figure 7-1 File Management Table 7-1 Descriptions of File Management Icons Icon Description Icon Create Description Back/Forward Go to the previous/ next page. Grid/List View the files in grid or Sort list mode.
Interactive Tablet User Manual Figure 7-2 Edit the Files Table 7-2 Descriptions of Editing Icons Icon Description Icon Description Select All Select all the files. Copy To Copy the selected file(s) to another folder. Move To Move the selected file(s) to another folder. Delete Delete the selected file(s). Share Share the selected file(s). Complete Turn back to the original page. Note Long press the file to perform other operations. 7.
Interactive Tablet User Manual Table 7-3 Introduction of System Pre-installed Applications Application Introduction Whiteboard It is applied to draw and write. You can use it to save, move, zoom in, zoom out, delete, and download the contents. Note It is used for recording brief information. You can swipe up from the bottom of the screen to use Note. User Manual You can refer to the user manual to perform basic operations. Upgrade It provides remote upgrade and local upgrade.
Interactive Tablet User Manual Appendix A. FAQs Question Cause and Solution Why do the condensations appear frequently on the screen? Tempered glass is installed on the outer screen to provide protection. There is a gap between the screen and the tempered glass for air convection. The main reason is that there is a temperature difference between the screen and the outside. Hot air condenses on the glass surface at a lower temperature, which results in condensations.
Interactive Tablet User Manual Question Cause and Solution Why does the device HDMI channel have no input signal? • Check if the input source works normally. • Change HDMI interface or cable. • If PC is accessed, set HDMI output on your PC. How to deal with image ghosting? • Check if the VGA cable is loose. • Try to change VGA cable or change to another VGA interface. How to deal with image color abnormality after accessing PC via VGA channel? • Check if the VGA cable is loose.
UD23116B
