Quick Start Guide

Table Of Contents

Chapter 5 Enroll via Device

5.1 Enroll Face via Device

Before You Start

• Power on and

acvate the device. For details about the acvaon, see Acvaon .

• Enable Face Required in

aer logging in the device backend.

Steps

1. Tap on the inial page.

2. Oponal: If you have added an administrator's face in and enabled Verify by Administrator in ,

you should verify the administrator's permission.

Figure 5-1 Authencate Administrator Page

Make sure the face is in the face

recognion frame when authencaon.

Note

For details about face recognion, see Tips When Collecng/Comparing Face Picture .

Tap on the right side and enter the administrator's name and password.

3. Enter the User Enrollment page.

Create an employee ID and tap Add

Present a card on the card

presenng area.

4. Enroll face.

1) Tap

to enter the face enrollment page.

2) Tap and follow the instrucons to enroll the face.

Note

Make sure that face is in the face recognion frame.

3) Oponal: Tap to enroll the face again.

4) Tap

to complete the face enrollment.

DS-K1F600-D6E Series Enrollment Staon Quick Start Guide