Quick Start Guide

Note
For details about face recognion, see Tips When Collecng/Comparing Face Picture .
5.
Oponal: Tap to edit the employee ID.
5.2 Enroll Fingerprint via Device
Before You Start
• Power on and acvate the device. For details about the acvaon, see Acvaon .
• Set
ngers in Select Finger in aer logging in the device backend.
Steps
1. Tap on the inial page.
2.
Oponal: If you have added an administrator's face in and enabled Verify by Administrator in ,
you should verify the administrator's permission.
Figure 5-2 Authencate Administrator Page
-
Make sure the face is in the face recognion frame when authencaon.
Note
For details about face recognion, see Tips When Collecng/Comparing Face Picture .
-
Tap on the right side and enter the administrator's name and password.
3. Enter the User Enrollment page.
-
Create an employee ID and tap Add
-
Present a card on the card presenng area.
4. Enroll ngerprint.
1) Tap to enter the Select Finger page.
2) Select a
nger on the Select Finger page.
Note
You can set ngers in .
3) Follow the instrucons and press a nger on the ngerprint module.
If the ngerprint is enrolled, the enrolled ngerprint on Select Finger page will turn to blue.
DS-K1F600-D6E Series Enrollment Staon Quick Start Guide
8