Quick Start Guide

4) Oponal: Tap the enrolled ngerprint (in blue) and tap OK in the dialogue box to clear the
enrolled data and enroll a new ngerprint.
5.
Oponal: Tap to edit the employee ID.
5.3 Enroll Card via Device
Before You Start
• Power on and
acvate the device. For details about the acvaon, see Acvaon .
•
Set Card Number per User and Card No. Length in aer logging in the device background.
Steps
1. Tap
on the inial page.
2. Oponal: If you have added an administrator's face in and enabled Verify by Administrator in ,
you should verify the administrator's permission.
Figure 5-3 Authencate Administrator Page
-
Make sure the face is in the face recognion frame when authencaon.
Note
For details about face recognion, see Tips When Collecng/Comparing Face Picture .
-
Tap on the right side and enter the administrator's name and password.
3. Enroll card.
-
Present card on the card presenng area and tap OK in the dialogue box. Create an
employee ID and tap Next.
-
Create an employee ID in the input box, and tap Add to enter the User Enrollment page. Tap
and present card on the card presenng area.
4. Oponal: Tap to edit the employee ID.
DS-K1F600-D6E Series Enrollment Staon Quick Start Guide
9